Aquapoxy Grout

unsuitable for:

• expansion joints or joints subject to movement
• unglazed natural tiles
• grouting moisture sensitive green marble
• tile joints with a width of less than 3mm or greater than 15mm

SPECIAL CARE REQUIRED

• Avoid grouting wet tile joints as Aquapoxy will be diluted by water and cure to an inferior finish. Rough or slip resistant tiles are difficult to grout. Aquapoxy will set on rough surfaces with an unsightly finish which will become very difficult to remove.
• Epoxy Wash, washed over installations after grouting, is recommended for rough or slip resistant tiles to help in cleaning tile surfaces close to the joints. Do not mechanically clean tiles as this will very likely damage the tile surface.
• Use the proportions supplied. For smaller applications, proportions must be weighed out on a scale at a rate of 150g Part 1: 150g Part 2: 900g Part 3.