FlexiFlex

  • COST EFFECTIVE
  • RUBBER BASED
  • HIGH BOND STRENGTH
  • FLEXURAL STRENGTH

ISO 13007 RATING C1

25kg

Flexi Flex is an off white adhesive composed of cement, fine graded sands and other special additives. This adhesive has been polymer modified for bonding all types of tiles to a variety of substrates subject to vibration and thermal movement and to achieve a high bond strength with non-porous tiles.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
recylced materials
au-c1 flexiflex

Suitable Substrates

  • Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Over Morgan Waterproof Membrane

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Bicottura
  • Monocottura
  • Fully Vitrified

Colour

  • Off White

Precautions

unsuitable for:
  • bonding moisture sensitive green marble
  • bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to constant water immersion such as swimming pools.
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.