Flexmaster

  • READY TO USE
  • LONG OPEN TIME
  • EASY TO TROWEL

ISO 13007 RATING D1E

20kg

Flexmaster is a pre-mixed mastic adhesive for bonding absorbent ceramic tiles. It is a water resistant, white, thin bed adhesive. Flexmaster has been specifically formulated for fixing interior ceramic wall tiles over sheeted interior wall systems and in some limited exterior applications.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
ISO-13007-Flexmaster

Suitable Substrates

  • Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)

Interior/Exterior

  • Walls

Suitable Tiles

  • Natural Stone
  • Bicottura
  • Monocottura

Colour

  • White

Precautions

unsuitable for:
  • bonding moisture sensitive green marble
  • bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to constant water immersion such as swimming pools
  • bonding to painted substrates
  • bonding together two impervious substrates
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.