Heavy Sanded Grout

  • FORMULATED FOR 6MM TO 20MM TILE JOINTS
  • ATTRACTIVE & COLOURFAST
  • ABRASION RESISTANT

AS4992 RATING CG1

20kg

Heavy Sanded Coloured Grout is a mixture of cement and special fine graded aggregates. Heavy Sanded Coloured Grout has been specially formulated for large tile joints and cures to an attractive, colourfast & abrasion resistant finish.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 4

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork (Cement Rendered)

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Bicottura
  • Monocottura
  • Fully Vitrified

Colour

  • See Below for Colour selection

Precautions

unsuitable for:
  • expansion joints or joints subject to movement
  • acid resistant installations
  • grouting moisture sensitive green marble
  • tile joints with a width of less than 6mm
SPECIAL CARE REQUIRED
  • Rough or open pored tiles are difficult to grout. Heavy Sanded Coloured Grout will set on rough surfaces with an unsightly finish which will become difficult to remove.
  • Floor Prep, washed over installations after grouting, is recommended for rough or open pored tiles to help in cleaning tile surfaces close to the joints.

Heavy Sanded Grout Colour Board

Sample board colours are representative of the available grout product, however each colour may vary on-site according to installation techniques and site conditions. Consequently Morgan makes no warranty or guarantee of any kind regarding the colour, texture, or appearance of a finished grout installation.

102 Black Sample Colour 103 Light Grey Sample Colour 104 Grey Sample Colour 120 Buff Sample Colour
127 BEIGE Sample Colour 128 SAND Sample Colour 147 Pale Beige Sample Colour 155 Lead Grey Sample Colour

Contact our sales team to find the right product for your next project.