Morgan Powdered Mastic (MPM)

  • COST EFFECTIVE
  • USER FRIENDLY
  • GROUT IN 6 HOURS

ISO 13007 RATING C1S1FT

20kg

MPM (Morgan Powdered Mastic) is an interior wall tile adhesive with all the properties that you need of a mastic adhesive in one pack. MPM exceeds the requirements of the Australian Standard AS4992, exhibiting high flexibility and high bond strength. MPM is a white cementitious, quick setting mastic designed to minimise the time between tiling and grouting an installation. MPM installations can usually be grouted after only 6 hours.

 

 

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 4
recylced materials
ISO-13007-MPM

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Painted Substrates
  • Over Morgan Waterproof Membrane

Interior/Exterior

  • Walls

Suitable Tiles

  • Natural Stone
  • Bicottura
  • Monocottura
  • Fully Vitrified
  • Porcelain

Colour

  • White

Precautions

unsuitable for:
  • bonding moisture sensitive green marble
  • bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.