Mortec SBR Waterproof Membrane

  • 400% ELONGATION
  • RAPID CURE
  • CRACK BRIDGING
  • SEAMLESS

AS4858 RATING Class 3

20kg

Morgan Technology (Mortec) presents Mortec SBR Waterproof Membrane, a water based premixed SBR, rapid cure roll on paste, which cures to a seamless membrane. The membrane conforms to the requirements of Australian Standards AS4858 and provides a long lasting water barrier under ceramic tiling installations.

 

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
water resistant
au-class 3 waterproof membrane

Suitable Substrates

  • Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Concrete (Primed)

Interior/Exterior

  • Walls
  • Floors

Colour

  • Blue

Additional Information

SUITABLE INSTALLATIONS
  • Shower Recesses
  • All Internal Wet Areas
  • Balconies

Precautions

unsuitable for:
  • areas where the membrane will be exposed and subjected to regular foot traffic
  • bonding to MDF board or timber & wax impregnated wood – (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to a negative hydrostatic pressure or rising damp
  • bonding to painted substrates
  • bonding to impervious or glazed substrates
SPECIAL CARE REQUIRED
  • Please consult Morgan Ceramic Tile Adhesives for a complete set of diagrammatic details pertaining to waterproofing.
  • SBR Waterproof Membrane must not be applied to substrates with temperatures below 10˚C or above 35˚C.
  • Do not add water or sand to the premix.
  • Check that the floors have proper falls built into the substrate.
  • Protect the membrane from rain for 7 days after installation. Shower recesses should not be used for 7 days after the membrane has cured.

Contact our sales team to find the right product for your next project.