Plastinex Red Label

  • BONDING AGENT FOR CEMENT & SAND SCREEDS AND RENDERS
  • ENHANCES BOND STRENGTH & FLEXIBILITY
  • PRIMER FOR ABSORBENT SUBSTRATES

20L

Plastinex is a water based styrene butadiene latex additive specifically designed to enhance the bond (tensile) and flexibility (shear) strength of cement based adhesives to non-porous tiles. Plastinex, diluted with water, reduces the porosity of boards & renders and is recommended as a general primer.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 1

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard & Jointing Compounds
  • Thin Section Mortars
  • Thick Bed Mortars

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Monocottura
  • Fully Vitrified
  • Porcelain
  • Glass Mosaics

Colour

  • White

Precautions

unsuitable for:
  • priming MDF board or timber & wax impregnated wood
  • metal substrates
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.