Powerflex Lite

  • HIGH FLEXIBILITY
  • ENHANCED HANDLING CHARACTERISTICS
  • GROUT IN 6 HOURS

ISO 13007 RATING C2S1F

20kg

Powerflex Lite is an off white, cementitious one pack, flexible, fast setting, rubber based tile adhesive. When mixed with water, Powerflex Lite becomes a smooth creamy paste that has extraordinary trowelling characteristics. Powerflex Lite, when cured, exhibits water resistance, high bond strength & superior flexibility. Powerflex Lite installations can usually be grouted after only 6 hours.

 

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
recylced materials
au-c2s1f powerflex lite

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Painted Substrates
  • Tilt Up Slabs
  • Tile Over Tile
  • Tile Over Timber Flooring & Cork or Vinyl & Vinyl Adhesive (Call us for free site specific technical advice)
  • Over Morgan Waterproof Membrane

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Bicottura
  • Monocottura
  • Fully Vitrified
  • Porcelain

Colour

  • Off White

Precautions

unsuitable for:
  • bonding moisture sensitive green marble
  • bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.