Powerflex Rapid 2 Pack

  • C2S1FE
  • EXCEEDS ISO 13007
  • NON-SLUMP
  • HIGH BOND STRENGTH

ISO 13007 RATING C2S1FE

20kg bags & 5L containers

Powerflex Rapid is an off white adhesive with a high bond strength which sets rapidly and is “trafficable” in 3 hours. Ideal for moisture sensitive stones. Powerflex Rapid has been designed for the rapid construction of airport, hospital and supermarket commercial floors.

This is a made to order product only.
low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
au-c2s1fe

Suitable Substrates

  • Concrete/Cement Render
  • Over Morgan Waterproof Membrane
  • Tile on Tile
  • Compressed fibre sheet

Interior/Exterior

  • Designed for commercial areas such as airports, hospitals and supermarkets
  • Powerflex Rapid can be used in any interior and exterior application

Additional Information

SPECIAL ADHESIVE PROPERTIES

  • High traffic area floors
  • Fast commercial construction
  • Green Marble & moisture sensitive stone
  • Ceramic tiles including porcelain and fully vitrified

Precautions

unsuitable for:
  • bonding to MDF board or timber & wax impregnated wood
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours.

Contact our sales team to find the right product for your next project.