Powerflex Rapid

  • C2F
  • EXCEEDS ISO 13007
  • NON-SLUMP
  • HIGH BOND STRENGTH

ISO 13007 RATING C2F

20kg

Powerflex Rapid is an off white adhesive with a high bond strength which sets rapidly and is “trafficable” in 3 hours. Powerflex Rapid has been designed for the rapid construction of airport, hospital and super-market floors. This is a made to order product only.

THIS IS A MADE TO ORDER PRODUCT ONLY

 

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
au-c2f

Suitable Substrates

  • Concrete/Cement Render
  • Over Morgan Waterproof Membrane

Interior/Exterior

  • Designed for commercial areas such as airports, hospitals and supermarkets
  • Powerflex Rapid can be used in any interior and exterior application

Additional Information

SPECIAL ADHESIVE PROPERTIES
  • High traffic area floors
  • Fast commercial construction
  • For natural stone tiles

Precautions

unsuitable for:
  • bonding to MDF board or timber & wax impregnated wood
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface. All grouts should be Damp Cured for 48 hours.

Contact our sales team to find the right product for your next project.