Powergrip Premium
- EXCEEDS AUSTRALIAN STANDARDS
- NON-SLUMP
- HIGH BOND STRENGTH
- VOC FREE
- RUBBER MODIFIED
- EXCEEDS AUSTRALIAN STANDARDS
- NON-SLUMP
- HIGH BOND STRENGTH
- VOC FREE
- RUBBER MODIFIED
C1S1E
20kgs
Powergrip Premium is a thick or thin bed premium cement based tile adhesive for porous type tiles. It has a high bond strength, adhering to all rigid surfaces and exceeds the requirements of ISO 13007.
Suitable Substrates
- Concrete/Cement Render
- Brickwork/Blockwork (Cement Rendered)
- Over Morgan Waterproof Membrane
Interior/Exterior
- Walls
- Floors
Suitable Tiles
- Natural Stone
- Porcelain
- Fully Vitrified
Colour
- White
Precautions
unsuitable for:
- bonding moisture sensitive green marble
- bonding to MDF board or timber & wax impregnated wood
- bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
- DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
- DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
- All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 2007 Section 5.7.3.
Related Products
Footer
