Powergrip White

  • EXCEEDS AUSTRALIAN STANDARDS
  • NON-SLUMP
  • HIGH BOND STRENGTH

ISO 13007 RATING C1

25kg

Powergrip is a thick or thin bed premium cement based tile adhesive for porous type tiles. It has a high bond strength, adhering to all rigid surfaces and exceeds the requirements of Australian Standards AS4992. Recommended as a powder additive to Plastinex for exceptionally high bond strength.

For moisture sensitive green marble, Morgan recommends a 1:1 mix of Plastinex Black Label and water as a liquid component for Powergrip White.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
au-c1 powergrip

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Over Morgan Waterproof Membrane

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Bicottura

Colour

  • Grey
  • White

Precautions

Powergrip is unsuitable for:
  • bonding moisture sensitive green marble
  • bonding Monocottura or Fully Vitrified Tiles unless Powergrip is mixed with Plastinex
  • bonding to MDF board or timber & wax impregnated wood
  • bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 2007 Section 5.7.3.

Contact our sales team to find the right product for your next project.