Pure Polymembrane

  • WATER BASED
  • FLEXIBLE & TOUGH
  • RAPID CURE SEAMLESS

AS4858 RATING Class 3

15L

Pure Polymembrane is a water based trowel on paste. Pure Polymembrane cures to a flexible, tough and seamless membrane. Pure Polymembrane conforms to the requirements of the Australian Standard AS/NZS 4858: 2004 “Wet area membranes” to provide a long lasting water barrier under tiling systems.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
water resistant
au-class 3 polymembrane

Suitable Substrates

  • Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Concrete (Primed)

Interior/Exterior

  • Walls
  • Floors

Colour

  • White

Additional Information

Suitable installations
  • Shower Recesses
  • All Internal Wet Areas
  • Balconies

Precautions

unsuitable for:
  • Areas where the membrane will be exposed and subjected to regular foot traffic
  • bonding to MDF board or timber & wax impregnated wood
  • bonding to substrates subject to negative hydrostatic pressure or rising damp
  • bonding to painted substrates
  • bonding to impervious glazed or glass substrates
SPECIAL CARE REQUIRED
  • Please consult Morgan Ceramic Tile Adhesives for a complete set of diagrammatic details pertaining to waterproofing.
  • Pure Polymembrane must not be applied to substrates with temperatures below 10˚C or above 35˚C.
  • Do not add water or sand to the premix.
  • Check that the floors have proper falls built into the substrate.
  • Protect the membrane from rain for 7 days after installation. Shower recesses should not be used for 7 days after the membrane has cured.

Contact our sales team to find the right product for your next project.