Tilefast Regular is an off white adhesive composed of cement, fine graded sands and other special additives. When mixed with water, it becomes an easy to trowel adhesive with good bond strength.
Brickwork/Blockwork (Cement Rendered)
Over Morgan Waterproof Membrane
bonding moisture sensitive green marble
bonding Monocottura or Fully Vitrified Tiles unless Tilefast Regular is mixed with Plastinex
bonding to MDF board or timber & wax impregnated wood
bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface. All grouts should be Damp Cured for 48 hours.
Refer to the Australian Standard AS 3958 Part 1 2007 Section 5.7.3.