Universal Primer

  • BONDING AGENT FOR CEMENT, SAND, SCREEDS AND RENDERS ENHANCES BOND STRENGTH & FLEXIBILITY
  • PRIMER FOR ABSORBENT SUBSTRATES

20L

Universal Primer is ready to go! Apply using a brush or roller to dry substrates before the application of self levellers, water based membranes and adhesives.

Universal Primer is suitable for substrates such as porous concrete, screeds, render, compressed fibre cement sheet, masonary, light weight blocks, autoclaved aerated concrete and plasterboard.

Universal Primer is unsuitable for priming MDF boards, wax impregnated wood, metal or plastic substrates, wet or damp substrates or on to silicon based materials.

 

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 1

Suitable Substrates

  • Concrete/Cement Render
  • Brickwork/Blockwork
  • Fibre Cement Sheets
  • Plasterboard & Jointing Compounds
  • Thin Section Mortars
  • Thick Bed Mortars

Interior/Exterior

  • Walls
  • Floors

Suitable Tiles

  • Natural Stone
  • Monocottura
  • Fully Vitrified
  • Porcelain
  • Glass Mosaics

 

Colour

  • Green

Precautions

unsuitable for:
  • priming MDF board or timber & wax impregnated wood
  • metal substrates
JOINT GROUTING PRECAUTIONS
  • DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
  • DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
  • All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.

Contact our sales team to find the right product for your next project.