Waterproof Membrane

  • WATER BASED
  • FLEXIBLE & TOUGH
  • FIBRE REINFORCED
  • SEAMLESS

AS4858 RATING Class 1

22kg

Waterproof Membrane is a water based, fibre reinforced, trowel on paste. Waterproof Membrane cures to a flexible, tough and seamless membrane. Waterproof Membrane conforms to the requirements of the Australian Standard AS/NZS 4858: 2004 “Wet area membranes” to provide a long lasting water barrier under tiling systems.

low voc
100%-Australian-Made
Australasia-Environmental-Management
ema 2
water resistant
au-class 1 waterproof membrane

Suitable Substrates

  • Cement Render
  • Brickwork/Blockwork (Cement Rendered)
  • Fibre Cement Sheets (Primed)
  • Plasterboard (Primed)
  • Concrete (Primed)

Interior/Exterior

  • Walls
  • Floors

Colour

  • Blue

Additional Information

SUITABLE INSTALLATIONS
  • Shower Recesses
  • All Internal Wet Areas
  • Balconies
  • Planter Boxes

Precautions

unsuitable for:
  • areas where the membrane will be exposed and subjected to regular foot traffic
  • bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
  • bonding to substrates subject to a negative hydrostatic pressure or rising damp
  • bonding to painted substrates
  • bonding to impervious glazed or glass substrates
SPECIAL CARE REQUIRED
  • Please consult Morgan Ceramic Tile Adhesives for a complete set of diagrammatic details pertaining to waterproofing.
  • Waterproof Membrane must not be applied to substrates with temperatures below 10°C or above 35°C.
  • Do not add water or sand to the premix.
  • Check that the floors have proper falls built into the substrate.
  • Protect the membrane from rain for 7 days after installation.
  • Shower recesses should not be used for 7 days after the membrane has cured

Contact our sales team to find the right product for your next project.