Morflex
- COST EFFECTIVE
- FLEXURAL STRENGTH
- GROUT IN 6 HOURS
- COST EFFECTIVE
- FLEXURAL STRENGTH
- GROUT IN 6 HOURS
ISO 13007 RATING C2
20kg
Morflex is a premium grade, flexible, cement based tile adhesive. Suitable for both thick and thin bed applications, Morflex is polymer modified for bonding all types of tiles to a variety of substrates subject to vibration and thermal movement. Morflex installations can usually be grouted after only 6 hours.
Suitable Substrates
- Concrete/Cement Render
- Brickwork/Blockwork (Cement Rendered)
- Fibre Cement Sheets (Primed)
- Plasterboard (Primed)
- Over Morgan Waterproof Membrane
Interior/Exterior
- Walls
- Floors
Suitable Tiles
- Natural Stone
- Bicottura
- Monocottura
- Fully Vitrified
- Porcelain
Colour
- White
Precautions
unsuitable for:
- bonding moisture sensitive green marble
- bonding to MDF board or timber & wax impregnated wood (Our technical advice – sheet with fibre cement boards)
- bonding to substrates subject to constant water immersion such as swimming pools.
JOINT GROUTING PRECAUTIONS
- DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
- DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
- All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.
Related Products
Footer
