Resinflex One Pack
- ANTI-FRACTURE & IMPACT SOUND INSULATION IN ONE PACK
- CRACK & ACOUSTIC ADHESIVE THAT ELIMINATES THE MATT AND THINSET
- ANTI-FRACTURE & IMPACT SOUND INSULATION IN ONE PACK
- CRACK & ACOUSTIC ADHESIVE THAT ELIMINATES THE MATT AND THINSET
ISO 13007 RATING C2S2F
20kg
Resinflex One Pack is a single pack rubber based adhesive designed to have crack bridging performance to 3mm and impact sound insulation to L’nT,w <62 dB when determined under AS/ISO 717-2/2004. Just add Resinflex One Pack to water to prepare an AS4992 C2S2F flexible adhesive that reduces sound transmission and that is shock and vibration resistant. Resinflex One Pack reduces construction costs by eliminating a polyurethane matt & adhesive when applied with 12mm trowel.
Suitable Substrates
- Apartment concrete floors
- Single storey concrete floors
- Over Morgan Waterproof Membranes
Interior/Exterior
INTERIOR ADHESIVE
- Specific acoustic adhesive for apartments and concrete floors
- Designed also for commercial areas such as airports, hospitals and supermarkets
Additional Information
SPECIAL ADHESIVE PROPERTIES
- Turns a two step sound control installation into one step only
- Crack isolation to 3mm
- Low VOC, LEED Compliant
- Too easy to use & trowel
- Part of the Morgan Life Time Warranty Guarantee
Precautions
unsuitable for:
- bonding to MDF board or timber and wax impregnated wood
- Bonding to substrates subject to constant water immersion
JOINT GROUTING PRECAUTIONS
- DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular colour finishes and also weaken the grout.
- DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
- All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1 Section 5.7.3.
Related Products
Footer
