TileFast Regular Plus
- COST EFFECTIVE
- EASY TO TROWEL
- GOOD BOND STRENGTH
- COST EFFECTIVE
- EASY TO TROWEL
- GOOD BOND STRENGTH
20kg
Tilefast Regular Plus is an off white adhesive composed of cement, fine graded sands and other special additives. It has a better workability and smoother consistency than Tilefast Regular.When mixed with water, it becomes an easy to trowel adhesive with good bond strength. Recommended for use with porous tiles.
Suitable Substrates
- Concrete/Cement Render
- Brickwork/Blockwork (Cement Rendered)
- Over Morgan Waterproof Membrane
Interior/Exterior
- Walls
- Floors
Suitable Tiles
- Natural Stone
- Bicottura
Colour
- Off White
Precautions
Unsuitable for:
- bonding moisture sensitive green marble
- bonding Monocottura or Fully Vitrified Tiles unless Tilefast Regular Plus is mixed with Plastinex
- bonding to MDF board or timber & wax impregnated wood
- bonding to substrates subject to constant water immersion such as swimming pools
JOINT GROUTING PRECAUTIONS
- DO NOT use excessive amounts of water during mixing or initial cleaning as this will cause irregular color finishes and also weaken the grout.
- DO NOT mix the grout with an electric drill above 300 RPM as this can entrap air into the mix causing grout to dry soft and powdery or with unsightly pin holes in the surface.
- All grouts should be Damp Cured for 48 hours. Refer to the Australian Standard AS 3958 Part 1, 2007, Section 5.7.3.
Related Products
Footer
